PT. MIMAKI INDONESIA

The speed after sheet detection and the speed during cutter up are too fast

  • Try reducing the sheet feeding speed (UP SPEED) to a slower value.

If the sheet feeding speed (UP SPEED) is too fast, follow these steps to lower the speed.

1. Press the FUNC1 key on the LOCAL mode screen.


 
2. Press the "∧" and "∨" keys to select [SETTING] and press the [ENTER/HOLD] key.


 
3. Press the "∧" and "∨" keys to select [UP SPEED] and press the [ENTER/HOLD] key.


 
4. Press the "∧" and "∨" keys to select the value of [UP SPEED X] and press the [ENTER/HOLD] key to set it.


* This setting adjusts the speed at which the cutter moves horizontally when cutting.  
 The recommended setting value is "AUTO" (the default value is 73).

5. Press the "∧" and "∨" keys to select the setting value of  [UP SPEED Y] and press the
  [ENTER/HOLD] key to set it.


* This setting adjusts the speed at which the cutter moves vertically when cutting.  
 The recommended setting value is "AUTO" (the default value is 100).

6. Press the [END] key several times to return to the LOCAL screen.


The settings are now complete.


Return to Content

PAGETOP